Black Horse Model Mustang P51 User Manual download pdf (Page 2)

P-51 MUSTANG Item code: BH140 . Instruction Manual

This instruction manual is designed to help you build a great flying aeroplane. Please read this

manual thoroughly before starting assembly of your

P-51-MUSTANG. Use the parts listing below

to identify all parts.

WARNING.

Please be aware that this aeroplane is not a toy and if assembled or used incorrectly it is

capable of causing injury to people or property. WHEN YOU FLY THIS AEROPLANE YOU

ASSUME ALL RISK & RESPONSIBILITY.

If you are inexperienced with basic R/C flight we strongly recommend you contact your R/C supplier

and join your local R/C Model Flying Club. R/C Model Flying Clubs offer a variety of training

procedures designed to help the new pilot on his way to successful R/C flight. They will also be able

to advise on any insurance and safety regulations that may apply.

TOOLS & SUPPLIES NEEDED.

 Thick cyanoacrylate glue.

 30 minute epoxy.

 5 minute epoxy.

 Hand or electric drill.

 Assorted drill bits.

 Modelling knife.

 Straight edge ruler.

 2mm ball driver.

 Phillips head screwdriver.

 220 grit sandpaper.

 90° square or builder’s triangle.

 Wire cutters.

 Masking tape & T-pins.

 Thread-lock.

 Paper towels.

Some more parts.

HARDWARE PACK

Cowling

Landing gear.....

To avoid scratching your new airplane, do not

unwrap the pieces until they are needed for

assembly. Cover your workbench with an old

towel or brown paper, both to protect the air-

craft and to protect the table. Keep a couple of

jars or bowls handy to hold the small parts af-

ter you open the bag.

PARTS LISTING.

FUSELAGE ASSEMBLY

 (1) Fuselage.

WING ASSEMBLY

 (1) Right wing half with pre-installed

aileron.

 (1) Left wing half with pre-installed

aileron.

Tail section assembly

 (1) Vertical stabilizer with pre-

installed rudder.

 (1) Horizontal stabilizer with pre-

installed elevator halves.

SUGGESTION.

NOTE.

Please trial fit all the parts. Make sure you have

the correct parts and that they fit and are

aligned properly before gluing! This will assure

proper assembly

.P-51 MUSTANG ARF is

hand made from natural materials, every plane

is unique and minor adjustments may have to

be made. However, you should find the fit su-

perior and assembly simple.

The painted and plastic parts used in this kit

are fuel proof. However, they are not tolerant

of many harsh chemicals including the follow-

ing: paint thinner, C/A glue accelerator, C/A glue

debonder and acetone. Do not let these chemi-

cals come in contact with the colors on the

covering and the plastic parts.

1 2 3 4 5 6 7 ... 33 34

Comments to this Manuals

No comments

Black Horse Model Mustang P51 User Manual Page 2

Comments to this Manuals